Discs for asphalt
Diamond segmented tools for dry cutting available, in diameters from 300 to 400 mm and wet cutting available in diameters from 300 to 600 mm These tools are suitable for asphalt, bituminous mixes, soft and very abrasive materials. They are recommended for use in manual cutters and floor-cutting machines. horizontal cuts of strips.
Discs for reinforced concrete and concrete
Diamond segmented tools for wet cutting available in diameters from 300 to 600 mm These tools are equipped with dragging hole. They are specifically designed for cutting reinforced concrete and concrete and are available for machines up to 16 Hp or with power over 16 Hp.
Discs for green concrete
Diamond segmented tools for wet cutting available in diameters 300, 350 and 400 mm These tools are equipped with dragging hole and side protection against abrasion. They are specifically designed for cutting green concrete and are available for machines up to , 16 Hp or with power over 16 Hp.
Universal discs
Diamond segmented tools for dry or wet cutting. Segmented type available in diameters from 115 to 400 mm and continuous rim in diameters from 115 to 300 mm These tools are universal and are specifically designed for cutting tiles, blocks, roof tiles, bricks, fiber concrete, fiber glass.
Discs for mural saws
Diamond segmented tools for wet cutting available in diameters from 600 to 1200 mm and larger upon request. These tools are supplied in standard or super type and are suitable for cutting reinforced concrete with wall saws. There is also a silenced type available in diameters from 600 to 1000 mm, recommended in particular for work conditions where low noise impact is required.
Core drills
Diamond tools suitable for hydraulic drill machines: available of an actual length of 450 mm with 1’’ ¼ coupling in diameters from 41 to 301 mm for wet drilling only. They are also available with an useful height of up to 1000
mm and any diameter. For hand drills: available of an useful height of 150 mm with M16 coupling in diameters from 25 to 202 mm for dry drilling