Wet cutting

Discs for Marble

Tools for wet cutting marble, stone, sandstone and agglomerates such as marble-resin and marble-concrete, to be used on bridge saws, tile saws, crosscutters, trimming machines, vertical and horizontal splitting machines. Available in diameters from 250 to 850 with normal or silent cores and 6, 7 mm diamond heights.

“RR” Discs

Tools for wet cutting marble, travertine and stone, natural and synthetic agglomerates, to be used on multiple and single head machines. Available in diameters from 200 to 400 mm, these discs have close segments and violin key slots and are recommended for cutting thin materials.

Discs for Granite

Tools for wet cutting natural granite, synthetic materials and particularly hard stone, to be used on bridge saws, tile saws, crosscutters and trimming machines. Available in diameters from 250 to 825 with normal or silent cores and 10, 12 and 15 mm
diamond heights.

“Jumbo” discs for Granite

Tools for wet cutting natural granite, synthetic materials and particularly hard stone, to be used on bridge saws, tile saws, crosscutters and trimming machines. Available in diameters from 350 to 625 with normal or silent cores and 18 and 20 mm diamond heights.

Blockcutter discs 

Tools for cutting strips of marble and granite, supplied for use as a single diameter set or “scaletta”. Available in diameters from 800 to 1600 mm, with segments of various shapes and diamond heights according to the application.

Discs for horizontal cuts

Discs with thicker cores and “cappello di prete” cores used mainly on mono or multidisc blockcutters for the horizontal cuts of strips.

Diamond segments

Diamond segments can be supplied loose to apply to new or used cores. Available in standard sizes and other sizes on request, both normal and sandwich types, straight and trapezoidal.